Verifying the configuration after a cluster switch upgrade

You can use the commands provided here to verify that all is operational after a BES-53248 cluster switch upgrade.

Steps

  1. Display information about the network ports on the cluster using the command: network port show -ipspace Cluster
    Link must have the value up and Health Status must be healthy.
    Example
    The following example shows the output from the command:
    cluster1::> network port show -ipspace Cluster
    
    Node: node1
                                                                        Ignore
                                                   Speed(Mbps) Health   Health
    Port   IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
    ------ ------------ ---------------- ---- ---- ----------- -------- ------
    e0a    Cluster      Cluster          up   9000  auto/10000 healthy  false
    e0b    Cluster      Cluster          up   9000  auto/10000 healthy  false
    
    Node: node2
                                                                        Ignore
                                                   Speed(Mbps) Health   Health
    Port   IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
    -----  ------------ ---------------- ---- ---- ----------- -------- ------
    e0a    Cluster      Cluster          up   9000  auto/10000 healthy  false
    e0b    Cluster      Cluster          up   9000  auto/10000 healthy  false
    
    	4 entries were displayed.
  2. Verify that for each LIF Is Home is true and Status Admin/Oper is up on both nodes using the command: network interface show -vserver Cluster
    Example
    cluster1::> network interface show -vserver Cluster
    
                Logical    Status     Network            Current       Current Is
    Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
    ----------- ---------- ---------- ------------------ ------------- ------- ----
    Cluster
                node1_clus1  up/up    169.254.217.125/16 node1         e0a     true
                node1_clus2  up/up    169.254.205.88/16  node1         e0b     true
                node2_clus1  up/up    169.254.252.125/16 node2         e0a     true
                node2_clus2  up/up    169.254.110.131/16 node2         e0b     true
    
    4 entries were displayed.
    
  3. Verify that the Health Status of each node is true using the command: cluster show
    Example
    cluster1::> cluster show
    
    Node                 Health  Eligibility   Epsilon
    -------------------- ------- ------------  ------------
    node1                true    true          false
    node2                true    true          false
    
    2 entries were displayed.