Skip to main content
VSC, VASA Provider, and SRA 9.7

Register with the virtual appliance for VSC, VASA Provider, and SRA

Contributors
PDFs

If you are using ONTAP 9.6 or earlier, then the vVol dashboard can display the details of VMware Virtual Volumes (vVols) datastores and virtual machines only if you have registered for VASA Provider to obtain data for the vVols VM and datastore reports.

Before you begin

You must have downloaded 2.1 or later from .

Note

The vVol dashboard displays performance metrics only when the SAN vVols datastores and virtual machines are configured using ONTAP 9.3 or later.
Steps

  1. From the Virtual Storage Console (VSC) Home page, click Settings.

  2. Click Manage Extension in the Administrative Settings tab.

  3. Use the Register OnCommand API Services slider to enable .

  4. Enter the IP address, service port, and credentials for .

    You can also use the Manage VASA Provider Extensions dialog box for the following modifications:

    • To update registration when there is any change to the credentials.

    • To unregister when you no longer require the vVol dashboard.

      You must clear the Register OnCommand API Services checkbox to remove the registration for VASA Provider.

  5. Click Apply.

    The vVol dashboard displays the metrics for ONTAP 9.6 or earlier SAN vVol datastores only after the registration of is complete.

Related information

NetApp Support