Skip to main content
A newer release of this product is available.

Monitor volumes on your storage cluster

Contributors netapp-pcarriga netapp-dbagwell
PDFs

The SolidFire system provisions storage using volumes. Volumes are block devices accessed over the network by iSCSI or Fibre Channel clients. You can monitor details about access groups, accounts, initiators, used capacity, Snapshot data protection status, number of iSCSI sessions, and the Quality of Service (QoS) policy associated with the volume.

You can also see details on active and deleted volumes.

With this view, you might first want to monitor the Used capacity column.

You can access this information only if you have NetApp Hybrid Cloud Control administrative privileges.

Steps

  1. Open the IP address of the management node in a web browser. For example:

    https://<ManagementNodeIP>

  2. Log in to NetApp Hybrid Cloud Control by providing the NetApp HCI storage cluster administrator credentials.

  3. In the left navigation blue box, select the NetApp HCI installation.

    The Hybrid Cloud Control Dashboard appears.

  4. In the left navigation, select the cluster and select Storage > Volumes.

    HCC Volumes page > Overview tab image

  5. On the Volumes page, use the following options:

    HCC Volumes page icons

    1. Filter the results by clicking the Filter icon.

    2. Hide or show columns by clicking the Hide/Show icon.

    3. Refresh data by clicking the Refresh icon.

    4. Download a CSV file by clicking on the Download icon.

  6. Monitor the Used capacity column. If Warning, Error, or Critical thresholds are reached, the color represents the used capacity status:

    1. Warning - Yellow

    2. Error - Orange

    3. Critical - Red

  7. From the Volumes view, click the tabs to see additional details about the volumes:

    1. Access Groups: You can see the volume access groups that are mapped from initiators to a collection of volumes for secured access.

      See information about volume access groups.

    2. Accounts: You can see the user accounts, which enable clients to connect to volumes on a node. When you create a volume, it is assigned to a specific user account.

      See information about NetApp HCI user accounts.

    3. Initiators: You can see the iSCSI initiator IQN or Fibre Channel WWPNs for the volume. Each IQN added to an access group can access each volume in the group without requiring CHAP authentication. Each WWPN added to an access group enables Fibre Channel network access to the volumes in the access group.

    4. QoS Policies: You can see the QoS policy applied to the volume. A QoS policy applies standardized settings for minimum IOPS, maximum IOPS, and burst IOPS to multiple volumes.

      See information about performance and QoS policies.

Find more information