Skip to main content
本繁體中文版使用機器翻譯，譯文僅供參考，若與英文版本牴觸，應以英文版本為準。

驗MetroCluster 證整個過程的效能狀況

貢獻者
PDF

您應該檢查MetroCluster 該組態的健全狀況、以驗證運作是否正確。

步驟

  1. 驗證MetroCluster 這些元件是否正常運作：

    《不一樣的跑程》MetroCluster

    cluster_A::> metrocluster check run

Last Checked On: 10/1/2017 16:03:37

Component           Result
------------------- ---------
nodes               ok
lifs                ok
config-replication  ok
aggregates          ok
4 entries were displayed.

Command completed. Use the "metrocluster check show -instance" command or sub-commands in "metrocluster check" directory for detailed results.
To check if the nodes are ready to do a switchover or switchback operation, run "metrocluster switchover -simulate" or "metrocluster switchback -simulate", respectively.

  2. 確認沒有健全狀況警示：

    「系統健全狀況警示顯示」