Skip to main content
Element Software
A newer release of this product is available.

ModifyClusterFullThreshold

Contributors netapp-pcarriga

You can use the ModifyClusterFullThreshold method to change the level at which the system generates an event when the storage cluster approaches a certain capacity utilization. You can use the threshold setting to indicate the acceptable amount of utilized block storage before the system generates a warning.

For example, if you want to be alerted when the system reaches 3% below the "Error" level block storage utilization, enter a value of "3" for the stage3BlockThresholdPercent parameter. If this level is reached, the system sends an alert to the Event Log in the Cluster Management Console.

Parameters

This method has the following input parameters:

Note You must select at least one parameter.
Name Description Type Default value Required

maxMetadataOverProvisionFactor

A value representative of the number of times metadata space can be over provisioned relative to the amount of space available. For example, if there was enough metadata space to store 100 TiB of volumes and this number was set to 5, then 500 TiB worth of volumes could be created.

integer

5

No

stage2AwareThreshold

The number of nodes of capacity remaining in the cluster before the system triggers a capacity notification.

integer

None

No

stage3BlockThresholdPercent

The percentage of block storage utilization below the "Error" threshold that causes the system to trigger a cluster "Warning" alert.

integer

None

No

stage3MetadataThresholdPercent

The percentage of metadata storage utilization below the “Error” threshold that causes the system to trigger a cluster “Warning” alert.

integer

None

No

Return values

This method has the following return values:

Name

Description

Type

blockFullness

The current computed level of block fullness of the cluster.

  • stage1Happy: No alerts or error conditions. Corresponds to the Healthy state in the web UI.

  • stage2Aware: No alerts or error conditions. Corresponds to the Healthy state in the web UI.

  • stage3Low: Your system cannot provide redundant data protection from two non-simultaneous node failures. Corresponds to the Warning state in the web UI. You can configure this level in the web UI (by default, the system triggers this alert at a capacity of 3% below the Error state).

  • stage4Critical: The system is not capable of providing redundant data protection from a single node failure. No new volumes or clones can be created. Corresponds to the Error state in the Element UI.

  • stage5CompletelyConsumed: Completely consumed. The cluster is read-only and iSCSI connections are maintained, but all writes are suspended. Corresponds to the Critical state in the Element UI.

string

fullness

Reflects the highest level of fullness between "blockFullness" and "metadataFullness".

string

maxMetadataOverProvisionFactor

A value representative of the number of times metadata space can be over provisioned relative to the amount of space available. For example, if there was enough metadata space to store 100 TiB of volumes and this number was set to 5, then 500 TiB worth of volumes could be created.

integer

metadataFullness

The current computed level of metadata fullness of the cluster.

  • stage1Happy: No alerts or error conditions. Corresponds to the Healthy state in the web UI.

  • stage2Aware: No alerts or error conditions. Corresponds to the Healthy state in the web UI.

  • stage3Low: Your system cannot provide redundant data protection from two non-simultaneous node failures. Corresponds to the Warning state in the web UI. You can configure this level in the web UI (by default, the system triggers this alert at a capacity of 3% below the Error state).

  • stage4Critical: The system is not capable of providing redundant data protection from a single node failure. No new volumes or clones can be created. Corresponds to the Error state in the Element UI.

  • stage5CompletelyConsumed: Completely consumed. The cluster is read-only and iSCSI connections are maintained, but all writes are suspended. Corresponds to the Critical state in the Element UI.

string

sliceReserveUsedThresholdPct

Error condition. A system alert is triggered if the reserved slice utilization is greater than the sliceReserveUsedThresholdPct value returned.

integer

stage2AwareThreshold

Awareness condition. The value that is set for "Stage 2" cluster threshold level.

integer

stage2BlockThresholdBytes

The number of bytes being used by the cluster at which a stage 2 fullness condition will exist.

integer

stage2MetadataThresholdBytes

The number of metadata bytes being used by the cluster at which a stage 2 fullness condition will exist.

stage3BlockThresholdBytes

The number of storage bytes being used by the cluster at which a stage 3 fullness condition will exist.

integer

stage3BlockThresholdPercent

The percent value set for stage 3. At this percent full, a warning is posted in the Alerts log.

integer

stage3LowThreshold

Error condition. The threshold at which a system alert is created due to low capacity on a cluster.

integer

stage3MetadataThresholdBytes

The number of metadata bytes used by the cluster at which a stage 3 fullness condition will exist.

stage4BlockThresholdBytes

The number of storage bytes being used by the cluster at which a stage 4 fullness condition will exist.

integer

stage4CriticalThreshold

Error condition. The threshold at which a system alert is created to warn about critically low capacity on a cluster.

integer

stage4MetadataThresholdBytes

The number of metadata bytes used by the cluster at which a stage 4 fullness condition will exist.

stage5BlockThresholdBytes

The number of storage bytes used by the cluster at which a stage 5 fullness condition will exist.

integer

stage5MetadataThresholdBytes

The number of metadata bytes used by the cluster at which a stage 5 fullness condition will exist.

sumTotalClusterBytes

The physical capacity of the cluster, measured in bytes.

integer

sumTotalMetadataClusterBytes

The total amount of space that can be used to store metadata.

integer

sumUsedClusterBytes

The number of storage bytes used on the cluster.

integer

sumUsedMetadataClusterBytes

The amount of space used on volume drives to store metadata.

integer

Request example

Requests for this method are similar to the following example:

{
   "method" : "ModifyClusterFullThreshold",
   "params" : {
              "stage3BlockThresholdPercent" : 3
              },
   "id" : 1
}

Response example

This method returns a response similar to the following example:

{
  "id": 1,
  "result": {
    "blockFullness": "stage1Happy",
    "fullness": "stage3Low",
    "maxMetadataOverProvisionFactor": 5,
    "metadataFullness": "stage3Low",
    "sliceReserveUsedThresholdPct": 5,
    "stage2AwareThreshold": 3,
    "stage2BlockThresholdBytes": 2640607661261,
    "stage3BlockThresholdBytes": 8281905846682,
    "stage3BlockThresholdPercent": 3,
    "stage3LowThreshold": 2,
    "stage4BlockThresholdBytes": 8641988709581,
    "stage4CriticalThreshold": 1,
    "stage5BlockThresholdBytes": 12002762096640,
    "sumTotalClusterBytes": 12002762096640,
    "sumTotalMetadataClusterBytes": 404849531289,
    "sumUsedClusterBytes": 45553617581,
    "sumUsedMetadataClusterBytes": 31703113728
  }
}

New since version

9.6