Skip to main content

Docs
English
All NetApp

All docs
ONTAP

ONTAP FlexArray

ONTAP FlexArray Docs
Implementing E-Series storage
Implementing third-party storage
Installing FlexArray
Legal Notices

General configuration guidelines for all storage arrays

07/21/2021 Contributors

Suggest changes

Request doc changes
Edit this page
Learn how to contribute

PDF of this doc site
- Implementing E-Series storage
  - Where to find information for configurations with storage arrays
  - Requirements for configuring E-Series storage arrays
  - Supported fabric-attached configurations for E-Series storage arrays
- Implementing third-party storage
  - Where to find information for configurations with storage arrays
  - General configuration guidelines for all storage arrays
  - EMC VNX storage arrays
  - EMC Symmetrix storage arrays
  - Hitachi storage arrays
  - HP EVA storage arrays
  - HP XP storage arrays
  - IBM DS storage arrays
  - IBM XIV storage arrays
  - 3PAR storage arrays
    - Required parameters for 3PAR arrays with ONTAP systems
  - Supported fabric-attached configurations
- Installing FlexArray
  - FlexArray Virtualization technology overview—using array LUNs for storage
  - Zoning in a configuration with storage arrays
  - Planning a configuration with array LUNs
    - Where to find information for configurations with storage arrays
  - Planning for RAID implementation
  - Planning for ONTAP use of array LUNs
    - How array LUNs become available for ONTAP storage use
    - Factors that impact the number and size of array LUNs you need
      - Considering checksum type when planning array LUN size and number
  - Planning for LUN security on the storage arrays
  - Planning for paths to array LUNs
    - Requirements for redundant setup of components in a path
    - Required number of paths to an array LUN
    - Benefits of using multiple LUN groups
  - Planning a port-to-port connectivity scheme
  - Determining the array LUNs for specific aggregates
  - Setting up ONTAP to work with array LUNs
  - Commands for checking back-end configuration
  - Verifying installation with storage arrays
    - Checking for back-end configuration errors preventing system operation
    - Verifying that the back-end configuration matches the intended configuration
  - Managing array LUNs using ONTAP
  - Troubleshooting configurations with storage arrays
    - Invalid path setup examples
    - Relationship between zoning and host group configuration
  - Target queue depth customization

Collection of separate PDF docs

Creating your file...

This may take a few minutes. Thanks for your patience.

Your file is ready

There are certain configuration guidelines that you must follow for any of the storage arrays supported by ONTAP.

On this page

© 2024 NetApp, Inc.

Terms of use
Privacy policy
Cookie policy
Cookie settings

Send feedback about this page