Skip to main content
ONTAP FlexArray

Configuring LUN security

Contributors netapp-chikkusu

The storage array administrator must configure the storage array and create host groups so that other hosts cannot access the array LUNs intended for use by ONTAP.

The concept of LUN security is similar to zoning except that LUN security is set up on the storage array. LUN security keeps different servers from using each other's storage on the SAN. LUN security might also be referred to as LUN masking.

  1. Set up LUN security on the storage array.

    Refer to the storage array documentation for information about setting up the LUN security.

    You should also see FlexArray virtualization implementation for third-party storage for any additional details regarding LUN security for your vendor's storage arrays. Some storage arrays must be dedicated for use by ONTAP systems.

  2. Create host groups, or the equivalent, for the ONTAP system.

    The term host group is used on some storage arrays to describe a configuration parameter that enables you to specify host access to specific ports on the storage array. Different storage arrays use different terms to describe this configuration parameter. Each storage array vendor has its own process for creating a host group or the equivalent.

Related information