BMC interface for SG6000, SG6100, and SG6200 StorageGRID appliances and services appliances
Suggest changes
PDFs
The user interface for the baseboard management controller (BMC) provides status information about your hardware and allows low-level hardware access for appliance configuration, monitoring, and diagnosis.
You can use the BMC to:
-
Troubleshoot your hardware installation
-
Configure SNMP settings
-
Determine your appliance's power state
-
Control the identify LED on your appliance
The following StorageGRID appliances support the BMC interface:
-
SG100
-
SG110
-
SG120
-
SG1000
-
SG1100
-
SG1200
-
SGF6024
-
SGF6112
-
SGF6212
-
SG6060
-
SG6160
-
SG6260
If you are installing your appliance, use the following procedures to configure the BMC:
If you have already installed the appliance into a grid and it's running StorageGRID software, use the following procedures:
-
Place the appliance into maintenance mode to access the StorageGRID appliance installer.
-
Refer to Set IP address for BMC management port for information about accessing the BMC interface using the StorageGRID Appliance Installer.
To learn more about what features you can use with the BMC after you have configured it, refer to Use the BMC interface and the BMC User Guide.