Skip to main content
StorageGRID Appliances

Set up hardware: Overview

Contributors netapp-perveilerk

After applying power to the appliance, you configure the network connections that will be used by StorageGRID.

Configure required network connections

For all appliances, you perform several tasks to configure required network connections such as:

  • Access the Appliance Installer

  • Configure network links

  • Verify port-level network connections

Additional configuration that might be required

Depending upon which appliance types you are configuring, additional hardware configuration might be required.

SANtricity System Manager

For SG6000 and SG5700, you configure SANtricity System Manager. The SANtricity software is used to monitor the hardware for these appliances.

BMC interface

The following appliances have a BMC interface that must be configured:

  • SG100

  • SG110

  • SG1000

  • SG1100

  • SG6000

  • SG6100

Optional configuration

  • Storage appliances

    • Configure SANtricity System Manager (SG5700 and SG6000) the software you will use to monitor the hardware

    • Change the RAID mode

    • Access the BMC interface for the SG6000-CN controller

  • Services appliances

    • Access the BMC interface for the SG100, SG110, SG1000, and SG1100