Rebooting the controller after FRU replacement

After you replace the FRU, you must reboot the controller module.

Step

  1. Boot to Maintenance mode:
    1. From the LOADER prompt, enter bye, and then boot the node to Maintenance mode interrupting the boot process by pressing Ctrl-C when you see Press Ctrl-C for Boot Menu.
    2. Select the option to boot to Maintenance mode from the displayed menu.
    Important: During the boot process, you might see the following prompts:
    • A prompt warning of a system ID mismatch and asking to override the system ID.
    • A prompt warning that when entering Maintenance mode in an HA configuration you must ensure that the healthy node remains down.

    You can safely respond y to these prompts.