Skip to main content
Cluster and storage switches
本繁體中文版使用機器翻譯,譯文僅供參考,若與英文版本牴觸,應以英文版本為準。

在 Cisco 9336C-FX2 叢集交換器上啟用 SSH

貢獻者

如果您使用叢集交換器健全狀況監視器(CSHM)和記錄收集功能、則必須產生SSH金鑰、然後在叢集交換器上啟用SSH。

步驟
  1. 確認 SSH 已停用:

    show ip ssh

    顯示範例
    (switch)# show ip ssh
    
    SSH Configuration
    
    Administrative Mode: .......................... Disabled
    SSH Port: ..................................... 22
    Protocol Level: ............................... Version 2
    SSH Sessions Currently Active: ................ 0
    Max SSH Sessions Allowed: ..................... 5
    SSH Timeout (mins): ........................... 5
    Keys Present: ................................. DSA(1024) RSA(1024) ECDSA(521)
    Key Generation In Progress: ................... None
    SSH Public Key Authentication Mode: ........... Disabled
    SCP server Administrative Mode: ............... Disabled
  2. 產生SSH金鑰:

    crypto key generate

    顯示範例
    (switch)# config
    
    (switch) (Config)# crypto key generate rsa
    
    Do you want to overwrite the existing RSA keys? (y/n): y
    
    
    (switch) (Config)# crypto key generate dsa
    
    Do you want to overwrite the existing DSA keys? (y/n): y
    
    
    (switch) (Config)# crypto key generate ecdsa 521
    
    Do you want to overwrite the existing ECDSA keys? (y/n): y
    
    (switch) (Config)# aaa authorization commands "noCmdAuthList" none
    (switch) (Config)# exit
    (switch)# ip ssh server enable
    (switch)# ip scp server enable
    (switch)# ip ssh pubkey-auth
    (switch)# write mem
    
    This operation may take a few minutes.
    Management interfaces will not be available during this time.
    Are you sure you want to save? (y/n) y
    
    Config file 'startup-config' created successfully.
    
    Configuration Saved!
  3. 重新啟動交換器:

    "重裝"

  4. 確認SSH已啟用:

    show ip ssh

    顯示範例
    (switch)# show ip ssh
    
    SSH Configuration
    
    Administrative Mode: .......................... Enabled
    SSH Port: ..................................... 22
    Protocol Level: ............................... Version 2
    SSH Sessions Currently Active: ................ 0
    Max SSH Sessions Allowed: ..................... 5
    SSH Timeout (mins): ........................... 5
    Keys Present: ................................. DSA(1024) RSA(1024) ECDSA(521)
    Key Generation In Progress: ................... None
    SSH Public Key Authentication Mode: ........... Enabled
    SCP server Administrative Mode: ............... Enabled
接下來呢?

"啟用記錄收集"