Reinstall trays

After you move the cabinet, you can reinstall the trays in their original locations.

About this task

Be sure to install the trays in their original locations.
CAUTION:
Do not install the following trays in the top of the cabinet over your head. When fully-populated, each of these trays weighs over 100 kg (220 lb). If installed in the top of the cabinet, the trays create a top-heavy cabinet that can become easily unbalanced:

Steps

  1. Reinstall all of the trays in their original locations in the cabinet.
    Warning: Risk of bodily injury – An empty tray weighs approximately 56.7 kg (125 lb). Three persons are required to safely move an empty tray. If the tray is populated with components, a mechanized lift is required to safely move the tray.
  2. Reinstall all of the components in their original locations in the trays.

    To prevent address conflicts and loss of data access, replace all components in the same tray and in the same location in the tray.

  3. Reinstall all cables to their original locations in the trays.
  4. Route the interface cables to the cabinet.
  5. Route the main power cords from the cabinet to the two external power sources. Do not plug in the power cords at this time.
  6. Go to Install cable spools and tie wraps.