Skip to main content
FlexPod

Install VMware vCenter Server 6.7

Contributors
PDFs

This section provides detailed procedures for installing VMware vCenter Server 6.7 in a FlexPod Express configuration.

Note FlexPod Express uses the VMware vCenter Server Appliance (VCSA).

Download the VMware vCenter server appliance

  1. Download the VCSA. Access the download link by clicking the Get vCenter Server icon when managing the ESXi host.

    Error: Missing Graphic Image

  2. Download the VCSA from the VMware site.

    Note Although the Microsoft Windows vCenter Server installable is supported, VMware recommends the VCSA for new deployments.

  3. Mount the ISO image.

  4. Navigate to the vcsa-ui-installer> win32 directory. Double- click installer.exe.

  5. Click Install.

  6. Click Next on the Introduction page.

  7. Accept the end- user license agreement.

  8. Select Embedded Platform Services Controller as the deployment type.

    Error: Missing Graphic Image

    Note If required, the External Platform Services Controller deployment is also supported as part of the FlexPod Express solution.

  9. In the Appliance Deployment Target, enter the IP address of an ESXi host you have deployed, and the root user name and root password.

    Error: Missing Graphic Image

  10. Set the appliance VM by entering VCSA as the VM name and the root password you would like to use for the VCSA.

    Error: Missing Graphic Image

  11. Select the deployment size that best fits your environment. Click Next.

    Error: Missing Graphic Image

  12. Select the infra_datastore_1 datastore. Click Next.

    Error: Missing Graphic Image

  13. Enter the following information in the Configure network settings page and click Next.

    1. Select MGMT-Network for Network.

    2. Enter the FQDN or IP to be used for the VCSA.

    3. Enter the IP address to be used.

    4. Enter the subnet mask to be used.

    5. Enter the default gateway.

    6. Enter the DNS server.

  14. On the Ready to Complete Stage 1 page, verify that the settings you have entered are correct. Click Finish.

    Error: Missing Graphic Image

    The VCSA installs now. This process takes several minutes.

  15. After stage 1 completes, a message appears stating that it has completed. Click Continue to begin stage 2 configuration.

  16. On the Stage 2 Introduction page, click Next.

    Error: Missing Graphic Image

  17. Enter <<var_ntp_id>> for the NTP server address. You can enter multiple NTP IP addresses.

    If you plan to use vCenter Server high availability (HA), make sure that SSH access is enabled.

  18. Configure the SSO domain name, password, and site name. Click Next.

    Record these values for your reference, especially if you deviate from the vsphere.local domain name.

  19. Join the VMware Customer Experience Program if desired. Click Next.

  20. View the summary of your settings. Click Finish or use the back button to edit settings.

  21. A message appears stating that you will not be able to pause or stop the installation from completing after it has started. Click OK to continue.

    The appliance setup continues. This takes several minutes.

    A message appears indicating that the setup was successful.

    The links that the installer provides to access vCenter Server are clickable.

Next: Configure VMware vCenter Server 6.7 and vSphere clustering.