Skip to main content
Cluster and storage switches

Documentation requirements for Cisco Nexus 9336C-FX2 shared switches

Contributors netapp-jolieg

For Cisco Nexus 9336C-FX2 switch installation and maintenance, be sure to review specific switch and controller documentation to set up your Cisco 9336-FX2 switches and ONTAP cluster.

To set up the Cisco Nexus 9336C-FX2 shared switches, see the Cisco Nexus 9000 Series Switches Support page.

Document title Description

Nexus 9000 Series Hardware Installation Guide

Provides detailed information about site requirements, switch hardware details, and installation options.

Cisco Nexus 9000 Series Switch Software Configuration Guides (choose the guide for the NX-OS release installed on your switches)

Provides initial switch configuration information that you need before you can configure the switch for ONTAP operation.

Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide (choose the guide for the NX-OS release installed on your switches)

Provides information on how to downgrade the switch to ONTAP supported switch software, if necessary.

Cisco Nexus 9000 Series NX-OS Command Reference Master Index

Provides links to the various command references provided by Cisco.

Cisco Nexus 9000 MIBs Reference

Describes the Management Information Base (MIB) files for the Nexus 9000 switches.

Nexus 9000 Series NX-OS System Message Reference

Describes the system messages for Cisco Nexus 9000 series switches, those that are informational, and others that might help diagnose problems with links, internal hardware, or the system software.

Cisco Nexus 9000 Series NX-OS Release Notes (choose the notes for the NX-OS release installed on your switches)

Describes the features, bugs, and limitations for the Cisco Nexus 9000 Series.

Regulatory Compliance and Safety Information for Cisco Nexus 9000 Series

Provides international agency compliance, safety, and statutory information for the Nexus 9000 series switches.