Skip to main content
System Manager Classic

Start the iSCSI service

Contributors netapp-mwallis

After you edit the iSCSI configuration file, you must start the iSCSI service so that the host can discover the targets and access LUNs. If the iSCSI service is running, you must restart it.

Step
  1. Start the iSCSI service at the Linux host command prompt:

    If you are using…​ Enter…​

    Red Hat Enterprise Linux 7 series and SUSE Linux Enterprise 12 series

    systemctl start iscsid

    Red Hat Enterprise Linux 6 series

    Note

    You must execute this command the first time you start the iSCSI service on a host running Red Hat Enterprise Linux 6 series and Oracle Linux 6 series. If you execute /etc/init.d/iscsi start without previously executing service iscsid force-start, you get an error message.

    service iscsid force-start

    Red Hat Enterprise Linux 5 or 4 series and Oracle Linux 5 series, Red Hat Enterprise Virtualization, Oracle Linux, and Oracle VM

    /etc/init.d/iscsi start

    SUSE Linux Enterprise Server 10 or 11 series

    /etc/init.d/open-iscsi start

    Citrix discourages the use of the iscsiadm tool. The native XAPI stack accomplishes the tasks of starting and stopping the iscsi service, automatic login on boot, and other iSCSI operations.