Skip to main content
System Manager Classic

Disks window in System Manager - ONTAP 9.7 and earlier

Contributors netapp-mwallis

You can use the Disks window in ONTAP System Manager classic (avaiable in ONTAP 9.7 and earlier) to view all the disks in your storage system.

Command buttons

  • Assign

    Assigns or reassigns the ownership of the disks to a node.

    This button is enabled only if the container type of the selected disks is unassigned, spare, or shared.

  • Zero Spares

    Erases all the data, and formats the spare disks and array LUNs.

  • Refresh

    Updates the information in the window.

Tabs

Summary

Displays detailed information about the disks in the cluster, including the size of the spare disks and assigned disks. The tab also graphically displays information about spare disks, aggregates, and root aggregates for HDDs and information about spare disks, disks in a storage pool, aggregates, Flash Pool aggregates, and root aggregates for cache disks (SSDs).

The HDD panel is not displayed for systems with All Flash Optimized personality.

The details panel provides additional information about partitioned and unpartitioned spare disks (disk type, node, disk size, RPM, checksum, number of available disks, and spare capacity), in tabular format.

Inventory

  • Name

    Displays the name of the disk.

  • Container Type

    Displays the purpose for which the disk is used. The possible values are Aggregate, Broken, Foreign, Label Maintenance, Maintenance, Shared, Spare, Unassigned, Volume, Unknown, and Unsupported.

  • Partition Type

    Displays the partition type of the disk.

  • Node Name

    Displays the name of the node that contains the aggregate.

    This field is available only at the cluster level.

  • Home owner

    Displays the name of the home node to which this disk is assigned.

  • Current owner

    Displays the name of the node that currently owns this disk.

  • Root owner

    Displays the name of the node that currently owns the root partition of this disk.

  • Data Owner

    Displays the name of the node that currently owns the data partition of this disk.

  • Data1 Owner

    Displays the name of the node that currently owns the data1 partition of the disk.

  • Data2 Owner

    Displays the name of the node that currently owns the data2 partition of the disk.

  • Storage Pool

    Displays the name of the storage pool with which the disk is associated.

  • Type

    Displays the type of the disk.

  • Firmware Version

    Displays the firmware version of the disk.

  • Model

    Displays the model of the disk.

  • RPM

    Displays the effective speed of the disk drive when the option raid.mix.hdd.rpm.capacity is enabled, and displays the actual speed of the disk drive when the option raid.mix.hdd.rpm.capacity is disabled.

    This field is not applicable to SSDs.

  • Effective Size

    Displays the usable space available on the disk.

  • Physical Space

    Displays the total physical space of the disk.

  • Shelf

    Displays the shelf on which the physical disks are located.

    This field is hidden by default.

  • Bay

    Displays the bay within the shelf for the physical disk.

    This field is hidden by default.

  • Pool

    Displays the name of the pool to which the selected disk is assigned.

    This field is hidden by default.

  • Checksum

    Displays the type of the checksum.

    This field is hidden by default.

  • Carrier ID

    Specifies information about disks that are located within the specified multi-disk carrier. The ID is a 64-bit value.

    This field is hidden by default.

Inventory details area

The area below the inventory tab displays detailed information about the selected disk, including information about the aggregate or volume (if applicable), vendor ID, zeroing state (in percent), serial number of the disk, and error details in case of a broken disk. For shared disks, the Inventory details area displays the names of all the aggregates, including the root and the non-root aggregates.

Related information