Skip to main content
OnCommand Insight

Testing the connectors

Contributors
PDFs

After you upgrade, you want to test the connectors to ensure that you have a connection from the OnCommand Insight Data Warehouse to the OnCommand Insight server.

Steps

  1. Log in to the Data Warehouse Portal at https://fqdn/dwh.

  2. From the navigation pane on the left, click Connectors.

  3. Select the first connector.

    The Edit Connector page displays.

  4. Click Test.

  5. If the test is successful, click Close; if it fails, enter the name of the Insight server in the Name field and its IP address in the Host field and click Test.

  6. When there is a successful connection between the Data Warehouse and the Insight server, click Save.

    If it does not succeed, check the connection configuration and ensure the Insight server does not have any issues.

  7. Click Test.

    Data Warehouse tests the connection.