Removing ports from an existing broadcast domain

If the ports that you want to add to the new broadcast domain are already in another broadcast domain, you must remove the ports from that broadcast domain before assigning them to the new broadcast domain.

Before you begin

You must be a cluster administrator to perform this task.

Steps

  1. Remove ports from the Default broadcast domain.
    Example
    network port broadcast-domain remove-ports -ipspace Default -broadcast-domain Default -ports node1:e0d,node1:e0e,node2:e0d,node2:e0e
  2. Verify that the ports are not assigned to a broadcast domain.
    Example
    network port show
    Node   Port      IPspace      Broadcast Domain Link   MTU    Admin/Oper
    ------ --------- ------------ ---------------- ----- ------- ------------
    node1
           e0a       Cluster      Cluster          up       9000  auto/1000
           e0b       Cluster      Cluster          up       9000  auto/1000
           e0c       Default      Default          up       1500  auto/1000
           e0d       Default      -                up       1500  auto/1000
           e0e       Default      -                up       1500  auto/1000
           e0f       Default      Default          up       1500  auto/1000
           e0g       Default      Default          up       1500  auto/1000
    node2
           e0a       Cluster      Cluster          up       9000  auto/1000
           e0b       Cluster      Cluster          up       9000  auto/1000
           e0c       Default      Default          up       1500  auto/1000
           e0d       Default      -                up       1500  auto/1000
           e0e       Default      -                up       1500  auto/1000
           e0f       Default      Default          up       1500  auto/1000
           e0g       Default      Default          up       1500  auto/1000