Creating a load balancer endpoint for FabricPool

When configuring StorageGRID for use with FabricPool, you configure a load balancer endpoint and upload the load balancer endpoint certificate, which is used to secure the connection between ONTAP and StorageGRID.

Before you begin

About this task

For details about this task, see the following:

Administering StorageGRID > Creating a load balancer endpoint.


  1. Select Configuration > Network Settings > Load Balancer Endpoints.

    Create LB Endpoint
  2. Select Add endpoint.
  3. Enter the following information.
    Field Description
    Display name A descriptive name for the endpoint
    Port The StorageGRID port you want to use for load balancing. This field defaults to 10433, but you can enter any unused external port. If you enter 80 or 443, the endpoint is configured only on Gateway Nodes, since these ports are reserved on Admin Nodes.
    Note: Ports used by other grid services are not permitted. To see the list of ports used for internal and external communications:

    StorageGRID networking guidelines > Network port reference

    You must provide this same port number to ONTAP when you attach StorageGRID as a FabricPool cloud tier.

    Protocol Must be HTTPS.
    Endpoint Binding Mode Use the Global setting (recommended) or restrict the accessibility of this endpoint to one of the following:
    • Specific high availability (HA) virtual IP addresses (VIPs). Use this selection only if you require much higher levels of isolation of workloads.
    • Specific network interfaces of specific nodes.
  4. Select Save.
    The Edit Endpoint dialog box appears.
  5. For Endpoint Service Type, select S3.
  6. Select Upload Certificate (recommended) and then browse to your server certificate, certificate private key, and CA bundle.

    Upload Cert
  7. Select Save.