Skip to main content

Connecting power cords and applying power (SG100 and SG1000)

Contributors netapp-lhalbert
PDFs

After connecting the network cables, you are ready to apply power to the appliance.

Steps

  1. Connect a power cord to each of the two power supply units in the appliance.

  2. Connect these two power cords to two different power distribution units (PDUs) in the cabinet or rack.

  3. If the power button on the front of the appliance is not currently illuminated blue, press the button to turn on power to the appliance.

    Do not press the power button again during the power-on process.

  4. If errors occur, correct any issues.

  5. Attach the front bezel to the appliance.

Related information

Viewing status indicators on the SG100 and SG1000 appliances