Skip to main content
A newer release of this product is available.

vserver nfs connected-clients show

Contributors
Suggest changes
PDFs

Display Current List of NFS connected clients

Availability: This command is available to cluster and Vserver administrators at the admin privilege level.

Description

The `nfs connected-clients show ` command displays information about currently connected NFS clients, and also other NFS clients that are are currently idle but can be connected.

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

| [-instance ] }

If you specify the -instance parameter, the command displays detailed information about all fields.

[-node {<nodename>|local}] - Node Name

Use this parameter to display information only about the specified node.

[-vserver <vserver>] - Vserver

Use this parameter to display information only about the specified vserver.

[-data-lif-ip <IP Address>] - Data LIF IP Address

Use this parameter to display information only about the specified data LIF IP.

[-client-ip <IP Address>] - Client IP Address

Use this parameter to display information only about the specified client IP.

[-volume <volume name>] - Volume Accessed

Use this parameter to display information only about the specified volume.

[-protocol <Client Access Protocol>] - Protocol Version

Use this parameter to display information only about the specified protocol.

[-idle-time <[<integer>d][<integer>h][<integer>m][<integer>s]>] - Idle Time (Sec)

Use this parameter to display the time elapsed since the client sent the last request for this volume.

[-local-reqs <integer>] - Number of Local Reqs

Use this parameter to display a counter tracking requests that are sent to the volume with fast-path.

[-remote-reqs <integer>] - Number of Remote Reqs

Use this parameter to display a counter tracking requests that are sent to the volume with slow-path to remote Dblade using a CSM session.

Examples

The following example displays the connected clients information.

cluster-1::*> nfs connected-clients show
Node: vsim1
  Vserver: vs1
  Data-Ip: 10.140.72.214
Client-Ip       Volume-Name      Protocol Idle-Time     Local-Reqs Remote-Reqs
--------------- ---------------- -------- ------------- ---------- -----------
10.140.137.57   rvol1            nfs4     2h 13m 56s    9          0
10.140.137.57   vol1             nfs3     6m 51s        14         0
10.140.137.57   vol1             nfs4     1d 2h 5m 53s  16         0
3 entries were displayed.