MetroCluster release notes
The requested article is not available. Either it doesn't apply to this version of the product or the relevant information is organized differently in this version of the docs. You can search, browse, or go back to the other version.
Mirroring the root aggregates
Contributors
Suggest changes
-
PDF of this doc site
-
Install a fabric-attached MetroCluster
-
Cable a fabric-attached MetroCluster configuration
-
Plan and install a MetroCluster configuration with array LUNs
-
-
Install a MetroCluster IP configuration
-
Install a stretch MetroCluster configuration
-
Maintain the MetroCluster components
-
Transition from MetroCluster FC to MetroCluster IP
-
Upgrade, refresh, or expand the MetroCluster configuration
-
Collection of separate PDF docs
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
You must mirror the root aggregates in your MetroCluster configuration to ensure data protection.
Before you begin
You must have ensured that the SyncMirror requirements for the MetroCluster configuration with array LUNs are satisfied. Refer to Requirements for a MetroCluster configuration with array LUNs.
About this task
You must repeat this task for each controller in the MetroCluster configuration.
Step
-
Mirror the unmirrored root aggregate:
storage aggregate mirrorThe following command mirrors the root aggregate for controller_A_1:
controller_A_1::> storage aggregate mirror aggr0_controller_A_1
The root aggregate is mirrored with array LUNs from pool1.
