The show volumeGroup command returns information about a volume group.
This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.
To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Storage Monitor role.
show volumeGroup [volumeGroupName]
Parameter | Description |
---|---|
volumeGroup | The name of the volume group for which you want to show information. Enclose the volume group name in square brackets ([ ]). |
This command returns volume group information as shown in this example:
Name: SecureGroup
Status: Optimal
Capacity: 120.000 GB
Current owner: Controller in slot A
Quality of Service (QoS) Attributes
RAID level: 5
Drive media type: Hard Disk Drive
Drive interface type: SAS
Shelf loss protection: No
Secure Capable: Yes
Secure: No
Data Assurance (DA) capable: Yes
DA enabled volume present: No
Resource-provisioned: Yes
Total Volumes: 1
Standard volumes: 1
Repository volumes: 0
Free Capacity: 110.000 GB
Associated drives - present (in piece order)
Total drives present: 5
Tray Slot
99 1
99 2
99 3
99 4
99 5
6.10