Skip to main content
SANtricity commands

Cancel asynchronous mirror group role reversal

Contributors netapp-driley

The stop asyncMirrorGroup rolechange command cancels a pending role reversal operation between asynchronous mirror groups.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600, and EF300 arrays, as long as all SMcli packages are installed.


To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.


stop asyncMirrorGroup [asyncMirrorGroupName] rolechange


Parameter Description


The name of the asynchronous mirror group for which or which you want to cancel the pending role reversal operation. Enclose the asynchronous mirror group name in square brackets ([ ]). If the asynchronous mirror group name contains special characters or consists only of numbers, you must enclose the name in double quotation marks (" ") inside square brackets.

Minimum firmware level


11.80 adds EF600 and EF300 array support