Get started
The requested article is not available. Either it doesn't apply to this version of the product or the relevant information is organized differently in this version of the docs. You can search, browse, or go back to the other version.
Set external key management settings
Contributors
Suggest changes
PDFs
Collection of separate PDF docs
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
The set storageArray externalKeyManagement command configures the external key management server address and port number.
Supported Arrays
This command applies to an individual E4000, E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.
Roles
To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.
Context
|
This command applies only to external key management. |
Syntax
set storageArray externalKeyManagement serverAddress=serverAddress
serverPort=portNumberCli
Parameters
| Parameter | Description |
|---|---|
|
Allows you to specify the external key management server address. The server address can be a fully qualified domain name, IPv4 address, or IPv6 address. |
|
Allows you to specify the port number of the external key management server. |
Example
SMcli -n Array1 -c "set storageArray externalKeyManagement serverAddress=192.0.2.1 serverPort=8081;" SMcli completed successfully.
Minimum firmware level
8.40
