Skip to main content
SANtricity commands

Update SNMP community

Contributors netapp-driley

The set snmpCommunity command creates a new name for an existing Simple Network Management Protocol (SNMP) community.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin role.

Syntax

set snmpCommunity communityName="snmpCommunityName"
newCommunityName="newSnmpCommunityName"

Parameters

Parameter Description

communityName

The name of the existing SNMP community that you want to rename. Enclose the SNMP community name in double quotation marks (" ").

newCommunityName

The new name that you want to give to the SNMP community. Enclose the SNMP community name in double quotation marks (" ").

Minimum firmware level

8.30