Skip to main content
SANtricity commands

Retrieve installed external key management certificate

Contributors netapp-driley

The save storageArray keyManagementCertificate command retrieves the installed certificate.

Supported Arrays

This command applies to an individual E4000, E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.

Context

Note

This command applies only to external key management.

Syntax

save storageArray keyManagementCertificate certificateType="certificateType"
file="filename"

Parameters

Parameter Description

certificateType

Allows you to specify the certificate type to install. Valid choices are: client or server.

file

Allows you to specify the filename for the signed certificate or server CA certificate.

Minimum firmware level

8.40