Unregister SNMP trap destination - SANtricity CLI

05/27/2025 Contributors

The delete snmpTrapDestination command deletes an existing Simple Network Management Protocol (SNMP) trap destination that you previously created and registered using the create snmpTrapDestination command.

Supported Arrays

This command applies to an individual E4000, E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Syntax

delete snmpTrapDestination trapReceiverIP=ipAddress

Parameters

Parameter Description

Parameter	Description
`trapReceiverIP`	The IP address of the SNMP manager from which you want to stop sending trap messages.

trapReceiverIP

The IP address of the SNMP manager from which you want to stop sending trap messages.

Minimum firmware level

8.30