Exit status
Exit statuses are returned on executed commands. The following table lists the exit statuses that might be returned and the meaning of each status.
Exit status definitions
Status Value | Error Name | Meaning |
---|---|---|
0 |
SUCCESSFUL |
The command terminated without an error. |
1 |
INVALID_USAGE |
The command terminated with an error. Information about the error also appears. |
2 |
SCRIPT_FILE_DOES_NOT_EXIST |
The script file does not exist. |
3 |
ERROR_OPENING_OUTPUT_FILE |
An error occurred while opening an output file. |
4 |
NO_STORAGE_ARRAY_AT_ADDRESS |
A storage array was not at the specified address. |
5 |
ADDRESSES_SPECIFY_DIFFERENT_ARRAYS |
Addresses specify different storage arrays. |
6 |
NO_SANAME_FOR_HOST_AGENT_CONNECT |
A storage array name does not exist for the host agent that is connected. |
7 |
SANAME_NOT_AT_ADDRESS |
The storage array name was not at the specified address. |
8 |
SANAME_NOT_UNIQUE |
The storage array name was not unique. |
9 |
SANAME_NOT_IN_CONFIG_FILES |
The storage array name was not in the configuration file. |
10 |
NO_MANAGEMENT_CLASS_FOR_SA |
A management class does not exist for the storage array. |
11 |
NO_SA_IN_CONFIG_FILE_FOUND |
A storage array was not found in the configuration file. |
12 |
INTERNAL_ERROR |
An internal error occurred. This exit status indicates that you do not have privileges for running a CLI command from the command line. You must have administrator privileges to run all of the CLI commands from a command line. |
13 |
INVALID_SCRIPT_SYNTAX |
Invalid script syntax was found. |
14 |
UNABLE_TO_COMMUNICATE |
The controller was unable to communicate with the storage array. |
15 |
DUPLICATE_ARGUMENT |
A duplicate argument was entered. |
16 |
EXECUTION_ERROR |
An execution error occurred. |
17 |
NO_HOST_AT_ADDRESS |
A host was not at the specified address. |
18 |
WWNAME_NOT_IN_CONFIG_FILES |
The WWID was not in the configuration file. |
19 |
WWNAME_NOT_AT_ADDRESS |
The WWID was not at the address. |
20 |
UNKNOWN_IP |
An unknown IP address was specified. |
21 |
PM_CONFIG_FILE_CORRUPTED |
The Event Monitor configuration file was corrupted. |
22 |
UNABLE_TO_COMMUNICATE_TO_PM |
The storage array was unable to communicate with the Event Monitor. |
23 |
UNEXIST_ALERT |
The controller was unable to write alert settings. |
24 |
WRONG_ORGANIZER_NODE |
The wrong organizer node was specified. |
25 |
CMD_NOT_AVAILABLE |
The command was not available. |
26 |
DEVICE_NOT_IN_CONFIG_FILE |
The device was not in the configuration file. |
27 |
ERROR_UPDATING_CONFIG_FILE |
An error occurred while updating the configuration file. |
28 |
UNKNOWN_HOST_ERROR |
An unknown host error occurred. |
29 |
SENDER_CONTACT_FILE_NOT_FOUND |
The sender contact information file was not found. |
30 |
READ_SENDER_CONTACT_FILE_FAILED |
The sender contact information file could not be read. |
31 |
USERDATA_FILE_EXISTS |
The |
32 |
BAD_EMAIL_INFORMATION_TO_INCLUDE |
An invalid |
33 |
BAD_EMAIL_FREQUENCY |
An invalid |
34 |
OPTION_REMOVED |
The |
35 |
UNKNOWN_ALERT_PRIORITY |
Invalid alert severity specified. |
36 |
PASSWORD_REQUIRED |
The operation needs either the Administrator or Monitor password to be set. |
37 |
INVALID_MONITOR_PASSWORD |
The operation cannot be completed because an invalid Monitor password was entered. |
38 |
INVALID_ADMIN_PASSWORD |
The operation cannot be completed because an invalid Administrator password was entered. |
39 |
EXCEEDED_MAX_CHARS_FOR_PASSWORD |
The password provided is exceeding the character limit. |
40 |
INVALID_MONITOR_TOKEN |
The |
41 |
ASUP_CONFIG_ERROR |
An error occurred while writing to or reading from the AutoSupport configuration file. Please retry this operation again. |
42 |
MAIL_SERVER_UNKNOWN |
Host address or mail server address is incorrect. |
43 |
ASUP_SMTP_REPLY_ADDRESS_REQUIRED |
No healthy ASUP enabled arrays detected while attempting ASUP configuration test. |
44 |
NO_ASUP_ARRAYS_DETECTED |
Reply email request required if ASUP delivery type is SMTP. |
45 |
ASUP_INVALID_MAIL_RELAY_SERVER |
Unable to validate ASUP mail relay server. |
46 |
ASUP_INVALID_SENDER_EMAIL |
Sender email address you specified is not a valid format. |
47 |
ASUP_INVALID_PAC_SCRIPT |
Proxy Auto-Configuration (PAC) script file is a not a valid URL. |
48 |
ASUP_INVALID_PROXY_SERVER_HOST_ADDRESS |
The Host address specified cannot be found or is in an incorrect format. |
49 |
ASUP_INVALID_PROXY_SERVER_PORT_NUMBER |
The port number you specified is an invalid format. |
50 |
ASUP_INVALID_AUTHENTICATION_PARAMETER |
The username or password you specified is invalid. |
51 |
ASUP_INVALID_DAILY_TIME_PARAMETER |
The daily time parameter specified is invalid. |
52 |
ASUP_INVALID_DAY_OF_WEEK_PARAMETER |
The |
53 |
ASUP_INVALID_WEEKLY_TIME_PARAMETER |
The weekly time parameter is not valid. |
54 |
ASUP_INVALID_SCHEDULE_PARSING |
Unable to successfully parse the schedule information provided. |
55 |
ASUP_INVALID_SA_SPECIFIED |
Invalid storage array specifier provided. |
56 |
ASUP_INVALID_INPUT_ARCHIVE |
The input archive entered is invalid. The input archive parameter must be in the form of |
57 |
ASUP_INVALID_OUTPUT_LOG |
A valid output log was not specified. |
58 |
ASUP_TRANSMISSION_FILE_COPY_ERROR |
There was an error trying to copy the AutoSupport transmission log file. The transmission log either does not exist or there was an IO error trying to copy its data. |
59 |
ASUP_DUPLICATE_NAMED_ARRAYS |
More than one storage array with the same name was found. Please retry the command using the world-wide-name parameter, |
60 |
ASUP_NO_SPECIFIED_ARRAY_FOUND |
The specified storage array with the -n <storage-system-name> parameter is not present or is not supported for this command. |
61 |
ASUP_NO_SPECIFIED_WWID_FOUND |
The specified storage array with the |
62 |
ASUP_FILTERED_TRANSMISSION_LOG_ERROR |
There was an unknown error trying to obtain the filtered transmission log. |
63 |
ASUP_TRANSMISSION_ARCHIVE_DOES_NOT_EXIST |
The AutoSupport input archive transmission log specified with the |
64 |
NO_VALID_REST_CLIENT_DISCOVERED |
Unable to communicate with the storage array via https. |
65 |
INVALID_CLI_VERSION |
The client CLI version is not compatible with the CLI version running on the storage array. |
66 |
INVALID_USERNAME_OR_PASSWORD |
The username or password entered is invalid. |
67 |
UNTRUSTED_CONNECTION |
Unable to establish a secure connection to the storage array. |
68 |
INVALID_PASSWORD_FILE |
The password file cannot be found or is not readable. |