Delete iSCSI initiator

09/10/2024 Contributors

The delete iscsiInitiator command deletes a specific iSCSI initiator object.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

This command is deprecated and is replaced by the Delete initiator command.

Syntax

delete iscsiInitiator (<"iscsiID"> | ["name"])

Parameters

Parameter Description

Parameter	Description
`iscsiInitiator`	The identifier of the iSCSI initiator that you want to delete. The identifier of the iSCSI initiator can be either an iSCSI ID or a unique name. Enclose an iSCSI ID in double quotation marks (" ") inside angle brackets (< >). Enclose the name in double quotation marks (" ") inside square brackets ([ ]).

iscsiInitiator

The identifier of the iSCSI initiator that you want to delete. The identifier of the iSCSI initiator can be either an iSCSI ID or a unique name.

Enclose an iSCSI ID in double quotation marks (" ") inside angle brackets (< >).

Enclose the name in double quotation marks (" ") inside square brackets ([ ]).

Minimum firmware level

7.10

8.41 This command is deprecated.