Start tray locate

09/10/2024 Contributors

The start tray locate command locates a tray by turning on the indicator light.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Context

Use the stop tray locate command to turn off the indicator light for the tray.

Syntax

start tray [trayID] locate

Parameter

Parameter Description

Parameter	Description
`tray`	The tray that you want to locate. Tray ID values are `0` to `99`. Enclose the tray ID value in square brackets ([ ]).

tray

The tray that you want to locate. Tray ID values are 0 to 99. Enclose the tray ID value in square brackets ([ ]).

Minimum firmware level

6.10