Display AutoSupport message collection schedule

The SMcli -autoSupportSchedule show command shows the schedule for collection and processing of both daily and weekly AutoSupport messages.

Supported Arrays

This command applies to all E2700 and E5600 storage arrays in the management domain at once. It does not apply to E2800 or E5700 storage arrays.

Context

Note: This command is an SMcli command, not a script command. You must run this command from a command line. You cannot run this command from the script editor in the storage management software.

Note the following with regard to the scheduling of Automatic Support Bundle collection:

Syntax

SMcli -autoSupportSchedule show

Parameters

None.

Minimum Firmware Level

8.25

Example

The output shows both the preferred time ranges, followed by the daily and weekly schedule.

Note: If you do not select preferred time ranges for both schedules, and preferred days of the week, then this command shows the daily schedule and weekly schedule that the storage management software picked at random.
SMcli -autoSupportSchedule show
The AutoSupport daily schedule preferred time range is from 12:00 AM to 01:00 AM.
The AutoSupport weekly schedule preferred time range is from 10:00 PM to 11:00 PM on Thursday, Saturday.
                                                  
Name           Daily Schedule         Weekly Schedule
Accounting     12:55 AM               10:08 PM on Thursdays
Finance        12:02 AM               10:30 PM on Saturdays

SMcli completed successfully.