Skip to main content
Die deutsche Sprachversion wurde als Serviceleistung für Sie durch maschinelle Übersetzung erstellt. Bei eventuellen Unstimmigkeiten hat die englische Sprachversion Vorrang.

Beispiel der Reaktion auf den eingeschränkten Systemzustand

Beitragende

Durch Überprüfung eines bestimmten Beispiels des beeinträchtigten Systemzustands, der durch ein Shelf verursacht wurde, in dem zwei Pfade zu einem Node fehlen, werden Sie sehen, was die CLI zeigt, wenn Sie auf eine Meldung antworten.

Nach dem Starten von ONTAP überprüfen Sie den Systemzustand, und Sie stellen fest, dass der Status „beeinträchtigt“ lautet:

      cluster1::>system health status show
        Status
        ---------------
        degraded

Sie zeigen die Meldungen an, um herauszufinden, wo das Problem ist, und sehen, dass Shelf 2 keine zwei Pfade zu node1 hat:

      cluster1::>system health alert show
               Node: node1
           Resource: Shelf ID 2
           Severity: Major
	   Indication Time: Mon Nov 10 16:48:12 2013
     Probable Cause: Disk shelf 2 does not have two paths to controller
                     node1.
    Possible Effect: Access to disk shelf 2 via controller node1 will be
                     lost with a single hardware component failure (e.g.
                     cable, HBA, or IOM failure).
 Corrective Actions: 1. Halt controller node1 and all controllers attached to disk shelf 2.
                     2. Connect disk shelf 2 to controller node1 via two paths following the rules in the Universal SAS and ACP Cabling Guide.
                     3. Reboot the halted controllers.
                     4. Contact support personnel if the alert persists.

Sie zeigen Details über die Meldung an, um weitere Informationen zu erhalten, einschließlich der Warn-ID:

      cluster1::>system health alert show -monitor node-connect -alert-id DualPathToDiskShelf_Alert -instance
                  Node: node1
               Monitor: node-connect
              Alert ID: DualPathToDiskShelf_Alert
     Alerting Resource: 50:05:0c:c1:02:00:0f:02
             Subsystem: SAS-connect
       Indication Time: Mon Mar 21 10:26:38 2011
    Perceived Severity: Major
        Probable Cause: Connection_establishment_error
           Description: Disk shelf 2 does not have two paths to controller node1.
    Corrective Actions: 1. Halt controller node1 and all controllers attached to disk shelf 2.
                        2. Connect disk shelf 2 to controller node1 via two paths following the rules in the Universal SAS and ACP Cabling Guide.
                        3. Reboot the halted controllers.
                        4. Contact support personnel if the alert persists.
       Possible Effect: Access to disk shelf 2 via controller node1 will be lost with a single
 hardware component failure (e.g. cable, HBA, or IOM failure).
           Acknowledge: false
              Suppress: false
                Policy: DualPathToDiskShelf_Policy
          Acknowledger: -
            Suppressor: -
Additional Information: Shelf uuid: 50:05:0c:c1:02:00:0f:02
                        Shelf id: 2
                        Shelf Name: 4d.shelf2
                        Number of Paths: 1
                        Number of Disks: 6
                        Adapter connected to IOMA:
                        Adapter connected to IOMB: 4d
Alerting Resource Name: Shelf ID 2

Sie bestätigen die Meldung, dass Sie daran arbeiten.

      cluster1::>system health alert modify -node node1 -alert-id DualPathToDiskShelf_Alert -acknowledge true

Sie reparieren die Verkabelung zwischen Shelf 2 und node1 und booten das System dann neu. Anschließend überprüfen Sie den Systemzustand wieder und sehen, dass der Status lautet OK:

      cluster1::>system health status show
        Status
        ---------------
        OK