Skip to main content
System Manager Classic

Verify that SNMP is enabled

Contributors netapp-thomi NetAppZacharyWambold
PDFs

You can use the ONTAP System Manager classic interface with ONTAP 9.7 or earlier to verify whether SNMP is enabled on the cluster.

About this task

In all versions of ONTAP, SNMPv3 is enabled by default at the cluster level and SNMPv1 and SNMPv2c are disabled by default. SNMPv1 and SNMPv2c are enabled when you create an SNMP community.

SNMP is disabled by default on data LIFs. For information about enabling SNMP on data LIFs, see Network management.

Steps

  1. Click the groove icon.

  2. In the Setup pane, navigate to the SNMP window.

    This image shows the part of the SNMP configuration screen that displays the SNMP enable status and the trap enable status.

    You can view the current SNMP status for the cluster.

    If SNMP is not enabled, click Enable.