Display LIF information
Contributors Download PDF of this page
You can view detailed information about a LIF to determine its configuration.
You might also want to view this information to diagnose basic LIF problems, such as checking for duplicate IP addresses or verifying whether the network port belongs to the correct subnet. storage virtual machine (SVM) administrators can view only the information about the LIFs associated with the SVM.
The following information is displayed:
IP address associated with the LIF
Administrative status of the LIF
Operational status of the LIF
The operational status of data LIFs is determined by the status of the SVM with which the data LIFs are associated. When the SVM is stopped, the operational status of the LIF changes to down. When the SVM is started again, the operational status changes to up
Node and the port on which the LIF resides
If data for a field is not available (for example, if there is no extended status information), the field value is listed as
Display LIF information by using the network interface show command.
You can view detailed information for each LIF by specifying the -instance parameter, or get specific information by specifying field names using the -fields parameter.
The following command displays general information about all LIFs in a cluster:
network interface show Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ---------- ---------- ---------- ---------------- ------------ ------- ---- example lif1 up/up 192.0.2.129/22 node-01 e0d false node cluster_mgmt up/up 192.0.2.3/20 node-02 e0c false node-01 clus1 up/up 192.0.2.65/18 node-01 e0a true clus2 up/up 192.0.2.66/18 node-01 e0b true mgmt1 up/up 192.0.2.1/20 node-01 e0c true node-02 clus1 up/up 192.0.2.67/18 node-02 e0a true clus2 up/up 192.0.2.68/18 node-02 e0b true mgmt2 up/up 192.0.2.2/20 node-02 e0d true vs1 d1 up/up 192.0.2.130/21 node-01 e0d false d2 up/up 192.0.2.131/21 node-01 e0d true data3 up/up 192.0.2.132/20 node-02 e0c true
The following command shows detailed information about a single LIF:
network interface show -lif data1 -instance Vserver Name: vs1 Logical Interface Name: data1 Role: data Data Protocol: nfs,cifs Home Node: node-01 Home Port: e0c Current Node: node-03 Current Port: e0c Operational Status: up Extended Status: - Is Home: false Network Address: 192.0.2.128 Netmask: 255.255.192.0 Bits in the Netmask: 18 IPv4 Link Local: - Subnet Name: - Administrative Status: up Failover Policy: local-only Firewall Policy: data Auto Revert: false Fully Qualified DNS Zone Name: xxx.example.com DNS Query Listen Enable: false Failover Group Name: Default FCP WWPN: - Address family: ipv4 Comment: - IPspace of LIF: Default