hypervisor.phy events

12/08/2023 Contributors

hypervisor.phy.nic.count

Severity: ALERT
Description: This message occurs when the number of physical NICs on the hypervisor is not sufficient for ONTAP® Select support.
Corrective Action: Add NICs to the hypervisor configuration to meet the requirements for ONTAP® Select.
Syslog Message: Insufficient number of physical NICs on the hypervisor: %d. ONTAP® Select requires %d NICs.
Parameters: count (INT): Count of physical NICs active on the hypervisor.
required (INT): Required number of physical NICs for ONTAP® Select to run on the hypervisor.

Severity: ALERT
Description: This message occurs when the MTU of the physical network interface is not large enough for ONTAP® Select support.
Corrective Action: The MTU for the network interface needs to be configured to the required size in the hypervisor configuration to meet the requirements for ONTAP® Select.
Syslog Message: Physical interface %s on the hypervisor is configured with MTU: %d. ONTAP® Select requires an MTU of %d.
Parameters: name (STRING): Physical network interface name.
mtu (INT): MTU of the physical network interface.
required (INT): Required MTU of the physical network interface.

Severity: ALERT
Description: This message occurs when the speed of the physical network interface is not sufficient for ONTAP® Select support.
Corrective Action: Check the cabling or negotiation for the port speed to meet the requirements for ONTAP® Select.
Syslog Message: Insufficient speed of physical network interface %s on the hypervisor: %s. ONTAP® Select requires %s.
Parameters: name (STRING): Physical network interface name.
speed (STRING): Current speed of the physical network interface in bps.
required (STRING): Required speed of the physical network interface in bps.

Severity: ALERT
Description: This message occurs when a physical network interface on the hypervisor is not operational.
Corrective Action: The interface, port, or cabling needs to be investigated for faults. The interface must be up to meet the requirements for ONTAP® Select.
Syslog Message: Physical network interface %s on the hypervisor is not operational. Current status: %s.
Parameters: name (STRING): Physical network interface name.
status (STRING): Opererational status of the physical network interface.